 |
| G & SW 10 ton timber trucks. |
These timber wagons ran in pairs so really I had no option other than to build a second to make a pair with the one I made and featured on my blog in April this year. The kits are from the Celtic Connection range from Taff Vale & Dragon Models and were built from the etches for their pig iron wagon, as the timber truck etches are currently unavailable, so some considerable modification was required to correct the brake gear. I thickened the sides of both these wagons by inserting wires between the inner and outer skins to make them a scale 3" thick, the resultant gap between the sides is neatly disguised by the metal coping strip soldered along the top edge.
The stanchions on the ends of the bolsters are attached to the bolster sides by chains so they can be removed enabling the outer loops for attaching chains to be positioned either inside or outside the stanchions. Each of these loops has a hook attached and a chain with a turnbuckle is linked to one of the loops on each truck.
I removed the cast lettering on the weight and number plates leaving them blank as I intend to print suitable paper plates for these which will have the advantage of legibility and correct colouring.
No comments:
Post a Comment