 |
| HR56 superstructure nearing completion, the smokebox dart arrived from LGM this morning. |
I chose to build a second model of one of Stroudley's Lochgorm Tanks simply because they make a very attractive and jolly little model. It would not be exactly the same by any means as all these little engines differed in detail. I had quite a few parts in hand, including an ABC motor-gearbox as well as a set of etches for the wheel overlays, which gave the project a flying start. The first HR Stroudley Tank that I built was a model of HR57, this was in 2013. This particular engine is comparatively well documented as there are far more photos extant of Lochgorm than of her other two sisters in the class. My choice of a second engine fell on no.56 rather than no.16 mainly because there exists a very detailed photo of the former in HR days as the Dornoch Tank and in addition I have the transfer lettering for the name Dornoch to hand. In all I unearthed five pictures of Dornoch in HR days and six of her in LMS livery, not all of which were uniformly helpful; perhaps this dearth of pictorial evidence is the reason why so few models of either 56 or 16 are built in gauge 0. Nevertheless, these few pictures provide enough information to build an authentic and well detailed model. My primary reference was the Laurie Ward drawing of Lochgorm in original condition, to which I added the differences, culled from the written record as well as from photographs, which characterised Dornoch. There are a surprising number of differences between the three engines of the class, particularly in the braking arrangements, which I'll deal with in my next posting when the chassis is complete.
HR56 was built in 1869 and originally carried the name Balnain, the others of the class, HR 57 and HR16 were built in 1872 and 1874 respectively. My model takes up the story of HR56 in about 1910 when, now named Dornoch (1902), a rear bunker was fitted in place of the tool box. In 1917 the tank which arched over the boiler was extended back to the cab which did little to improve the appearance of the engine which was compromised further in 1920 when the HR modified her elegant Jones chimney by adding a clumsy flared top.
Most of the brass and nickle silver castings used in the model are from Laurie Griffin (LGM) who, I believe, intended to introduce a kit of this engine into his range and though this never materialised, the castings for the kit did, which is a great help. Agenoria Models produced a rather dubious kit for a Lochgorm Tank, though it is no longer available. My own model of HR56 is built without the aid of a kit which not only lessens expense but also cuts out the aggravation of wrestling with a bottom end of the market kit.
In the Blog Archive in the right hand column you'll find postings from July 2013 which cover the building of my earlier model of HR57 Lochgorm in some detail.
 |
| A rear bunker was fitted to HR56 in 1910 and the previous coal space in front of the cab was faired over and given a hand rail. The rear lamp irons were removed at this time and the rear cab windows modified becoming square rather than rectangular. The removable roof is a modified white metal casting from Laurie Griffin Miniatures. |
 |
| The coal hole has a vertically sliding door. In the cab corners are what I think are sand boxes though by 1910 braking arrangements left no room for a rear sanding mechanism. |
 |
| There is an inner skin to the front cab plate to which the boiler back-head attaches. The whole assembly can then be removed for painting. Wooden flooring is made from model ship planking. |
 |
| Awaiting the smokebox dart which arrived today from LGM. Note the triangular bracket right of the coupling hook which accommodates the vacuum pipe, though the route that this takes out of sight remains uncertain, I think it probably runs behind the footplate valance. The coupling hook is made from 1.2mm sheet n/s, the single link comes from my spares box. |
 |
| Not a great many models in gauge 0 have been made of HR56. Note the 2" gap between the water tank and the cab forward extension. A fairing, oversailing the boiler, provides seating for the dome and safety valves. |
