Pete has produced a new set of cast resin ends and sides to add to his expanding range of 7mm scale Highland Railway wagon scratch building aids. The parts are for a HR Jones open wagon, they are available direct from the author at a cost of £20.00 per set plus postage at cost, £1.29.
If you buy 2 sets of castings postage is free (UK).
Buy three or more and discount is 10%.
You can e-mail, phone or message on...
armstrongps1@gmx.com
017687 71302
07342 637 813
The wagon corners are mitred and there are slots behind the solebars to allow room for sprung buffers to move. Once the sides and ends are assembled a 1mm Plastikard floor is cut and faced with 4mm spaced planking; this locates in a groove between the sides and on the rear of the buffer beam to complete and strengthen the basic body structure. All components below the solebar can be obtained from the trade, or can be scratch built from sheet metal. In effect, with a little help from the scrap box, you're creating your own multi-media kit, and all the components are your own preferences.
HR buffers and 3ft 6" wagon springs are available from Invertrain.
Axleboxes from Lochgorm Kits
Wheels are Slaters' Ref. 7123 3ft 7" 8 split-spoke.
Horse hooks and brake pin rack from 62C Models.
Slaters' Plastikard Ref. 0434 4mm spaced planking
W-irons; Slaters or Furness Wagon Co.
 |
| Resin sides and ends for Jones 15ft 4-plank open wagon HR diagram 19 |
 |
| Completed wagon; brake gear from spares box, with parts cut from sheet and from 62C models |
 |
| HR Jones d.16 open wagon |
 |
| Jones Open Wagon 1470 complete |
 |
| A purposeful Jones open wagon with a timber load, ready for action. |
Things to Come...
